Racingline R360 Alloy Wheel 20×8.5J – 5×112 ET44
The Racingline R360 is a 20-inch flow-formed alloy wheel designed specifically for Volkswagen Group MQB and MQB Evo performance platforms. It pairs a clean, modern multi-spoke design with serious engineering credentials, giving your car a sharper look without compromising on strength or driving feel.
As an authorised Racingline retailer, we supply the R360 in three finishes and as either a single wheel or full set of four, making it easy to choose the right setup for your build.
Why Flow-Formed Wheels Matter
Flow-forming is a manufacturing process where the wheel’s barrel is spun, heated and stretched under high pressure. This compresses and aligns the aluminium grain, producing a wheel that is significantly stronger and lighter than a traditional cast wheel, without the higher cost of a fully forged design.
In practical terms, this means each R360 weighs around 10.5kg, which is over 2kg lighter than many standard OEM wheels in this size. Less unsprung weight (the weight not supported by the suspension) helps the suspension respond more quickly to bumps, improves steering feel and can offer small gains in acceleration and efficiency.
Key Features
- Lightweight construction: Approximately 10.5kg per wheel thanks to flow-forming technology.
- High load rating: 650kg per wheel, suitable for both road and track use.
- Durable finish: Hard-wearing gloss paint designed to resist the rigours of daily driving.
- Signature details: Includes Racingline centre caps and a subtle cast R-bar logo on the inner rim.
- Three colour options: Star Silver, Gunmetal Grey and Gloss Black.
Designed for VAG MQB and MQB Evo Platforms
With an 8.5J width, 20-inch diameter, ET44 offset, 5×112 PCD and a 57.1mm centre bore, the R360 is built around the dimensions used across the wider Volkswagen, Audi, SEAT/Cupra and Skoda performance range. It suits a variety of larger hot hatches, saloons and SUVs on the MQB, MQB Evo and A5 platforms.
To make sure this wheel is correct for your specific car, please use the vehicle lookup tool on the Racingline Shop or check the Vehicle Fitment tab on this listing before ordering.
Technical Specification
| Attribute | Specification |
|---|---|
| Diameter | 20″ |
| Width | 8.5J |
| PCD | 5×112 |
| Offset | ET44 |
| Centre Bore | 57.1mm |
| Load Rating | 650kg per wheel |
| Weight | Approx. 10.5kg per wheel |
| Construction | Flow-Formed Aluminium |
| Finishes | Star Silver, Gunmetal Grey, Gloss Black |
Choosing Your Configuration
The R360 is available as a single wheel, ideal if you need to replace a damaged item or match an existing set, or as a full set of four for a complete wheel upgrade. Each option is offered in all three colour finishes so you can match the look of your car exactly.
Important: Always confirm fitment before ordering. While the 5×112 PCD and ET44 offset suit a wide range of VAG vehicles, brake clearance, arch clearance and tyre sizing can vary between models and trims. If in doubt, check the Vehicle Fitment tab or use the vehicle lookup on the Racingline Shop.
Applications
Please note, customers are wholly responsible for checking fitment for their vehicle.























